-
Home
-
About Us
-
News
-
Solutions
-
Service
-
Download
-
Contact
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
Design for Industrial Application
uHigh-powered industrial cellular module
uHigh-powered industrial 32bits CPU
uSupport low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
uHousing: iron, providing IP30 protection.
uPower range: DC 5~35V
Stability and Reliability
uSupport hardware and software WDT
uSupport auto recovery mechanism, including online detect, auto redial when offline to make router always online
uEthernet port: 1.5KV magnetic isolation protection
uRS232/RS485/RS422 port: 15KV ESD protection
uSIM/UIM port: 15KV ESD protection
uPower port: reverse-voltage and overvoltage protection
uAntenna port: lightning protection(optional)
Standard and Convenience
uSupport standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
uSupport standard WAN port and PPPOE protocol that can connect to ADSL directly
uSupport intellectual mode, enter into communication state automatically when powered
uProvide management software for remote management
uSupport several work modes
uConvenient configuration and maintenance interface（WEB or CLI）
High-performance
uSupport double link backup between EVDO and WAN(PPPOE, ADSL) (optional)
uSupport VPN client(PPTP, L2TP, IPSEC and GRE)(only for VPN version)
uSupport port mirror function(optional)
uSupport WIFI AP, WIFI AP client and WDS(optional)
uSupport multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
uSupport APN/VPDN
uSupport wireless video monitoring and dynamic picture transfer
uSupport DHCP server and client, DDNS, firewall, NAT, DMZ host etc.
uSupport multi protocols, such as TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, etc.
Cellular Specification
Standard and Band Bandwidth TX power RX sensitivity F3133 GPRS ROUTER EGSM900/GSM1800MHz, GSM850/900/1800/1900MHz (optional) Compliant to GSM phase 2/2+ GPRS class 10, class 12(optional) 85.6Kbps GSM850/900：<33dBm GSM1800/1900：<30dBm <-107 dBm F3233 CDMA ROUTER CDMA2000 1xRTT 800MHz 800/1900MHz(optional) 450MHz(optional) 153.6Kbps <30dBm <-104 dBm F3333 EDGE ROUTER GSM850/900/1800/1900MHz GPRS/EDGE Class 12 236.8Kbps GSM850/900：<33dBm GSM1800/1900：<30dBm <-106 dBm F3433 WCDMA&HSDPA&HSUPA ROUTER UMTS/WCDMA/HSDPA/HSUPA 850/1900/2100MHz 850/900/1900/2100MHz(optional) GSM850/900/1800/1900MHz GPRS/EDGE CLASS 12 HSUPA:5.76Mbps (Upload speed) HSDPA:7.2Mbps (Download speed) UMTS:384Kbps (DL/UL) <24dBm <-109 dBm F3533 TD-SCDMA ROUTER TD-SCDMA/HSDPA/HSUPA 1880-1920/2010-2025MHz GSM850/900/1800/1900MHz GPRS/EDGE CLASS 12 Download speed:2.8Mbps upload speed:2.2Mbps <24dBm <-108 dBm F3633 CDMA2000 1X EVDO CDMA2000 1X EVDO Rev A 800MHz,800/1900MHz(optional) 450MHz (optional) CDMA2000 1X RTT, IS-95 A/B Download speed:3.1Mbps upload speed:1.8Mbps <23dBm <-104 dBm
WIFI Specification
|
Item |
Content |
|
Standard |
IEEE802.11b/g IEEE802.11n (optional) |
|
Bandwidth |
IEEE802.11b/g: 54Mbps (max) IEEE802.11n: 300Mbps (max) |
|
Security |
WEP, WPA, WPA2, etc. WPS (optional) |
|
TX power |
16-17dBm(11g), 18-20dBm(11b) |
|
RX sensitivity |
<-72dBm@54Mpbs |
Hardware System
|
Item |
Content |
|
CPU |
Industrial 32bits CPU |
|
FLASH |
4MB(Extendable to 16MB) |
|
SDRAM |
32MB(Extendable to 64MB) |
Interface Type
|
Item |
Content |
|
WAN |
1 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
|
LAN |
4 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
|
Serial |
1 RS232(or RS485/RS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd, space, mark Baud rate: 110~230400 bps |
|
Indicator |
"Power", "System", "Online", "Alarm", " Local Network ", "WAN", "WLAN" |
|
Antenna |
Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional) WIFI: Standard SMA male interface, 50 ohm, lighting protection(optional) |
|
SIM/UIM |
Standard 3V/1.8V user card interface, 15KV ESD protection |
|
Power |
Standard 3-PIN power jack, reverse-voltage and overvoltage protection |
|
Reset |
Restore the router to its original factory default settings |
|
USB |
Standard A type USB host interface (reserved) |
Power Input
|
Item |
Content |
|
Standard Power |
DC 12V/1.5A |
|
|
DC 5~35V |
|
Consumption |
<450mA (12V) |
Physical Characteristics
|
Item |
Content |
|
Housing |
Iron, providing IP30 protection |
|
Dimensions |
206x135x28 mm |
|
Weight |
790g |
Environmental Limits
|
Item |
Content |
|
Operating Temperature |
-25~+65ºC（-13~+149℉） |
|
Extended Operating Temperature |
-30~+75ºC（-22~+167℉） |
|
Storage Temperature |
-40~+85ºC（-40~+185℉） |
|
Operating Humidity |
95% ( Non-condensing) |
Use PC and WINDOWS operating systems can easily build their own VPN network, which XP series only supports one client connection, if 2003 system ,the system can be used to achieve multi-VPN client.
The above topology displayed the VPN network between cellular router and PC platform.
b.Hardware firewall or router to be as VPN server
Our routers can realize the VPN network with the vpn hardware and other devices , such as HUAWEI, CISCO, ZTE, D-LINK, TP-LINK, JUNIPER, NETGEAR
c.GRE
GRE achieve VPN networks, enabling VPN devices communicate with each other between subnets.
The following describes the topology of 192.168.1.0 and 192.168.2.0 through the tunnel to the formation of virtual local area networks. Finally the equipments between the two segments 192.168.1.0 and 192.168.2.0 can be accessed directly.
d.Ipsec
IPSEC mainly play subnet protection, tunnel encryption, more secure communications .
The following describes the topology of the two segments between 192.168.1.0 and 192.168.2.0 via IPSEC encrypted tunnel to the formation of virtual local area networks. Finally , the equipments between the two segments 192.168.1.0 and 192.168.2.0 can be accessed directly.
2)Mid/large-scale VPN networks
General large-scale VPN network, you can use PPTP/L2TP ways. The following topologies with a short introduction about a different network segment such as N between 192.168.1.0-192.168.N.0, via tunnel and static route to achieve large-scale virtual Local Area Network.
